3.3V Power Supply 40g Passive Direct Copper Cable Dac Patch Cord

• Customization: Available
• Application: Communication, Sensor, Medicine, Probe
• Type: Single-mode Fiber
• Model NO.: DAC Patch Cord
• Connection Structure: SC
• Material Shape: Round Wire
• Allowed Lateral Pressure: 100(N/100mm)<1000(N/100mm)
• Allowed Tensile Strength: 1000N<10000N
• Core: Single Core
• Certification: RoHS, CE, ISO9001
• Brand: Fibconet
• Sheath Material: PVC
• Model Number: Aoc Patch Cord
• Brand Name: OEM
• Temperature: 0 to 70ºC
• Voltage: Sm/mm3.0 to 3.6V
• Tx Power: -5 to -1dBm
• Rx Power: -30 to 0dBm
• Bias Current: 0 to 100mA
• Transport Package: Carton
• Specification: Customized
• Trademark: Fibconet
• Origin: Ningbo, China
• HS Code: 7413000000
• Production Capacity: 5, 000, 000pieces/Month

Product Description

3.3V Power Supply 40G Passive Direct Copper Cable DAC Patch Cord


Description:

 IH's 40G QSFP+ Passive Copper Cables  are high performance,cost effective I/O solutions for 40G LAN, HPC and SAN applications. The QSFP+ passive copper cables are compliant with SFF-8436, QSFP+ MSA and IEEE P802.3ba 40GBASE-CR4. It is offer a low power consumption,short reach intercon- nect applications. The cable each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.
   IH's 40G QSFP+ Passive Copper Cables are customized for an ultra-high performance, cost effective cable solution in 40-Gigabit speed applications including switched fabric I/O, switches, routers, data storage arrays, and high performance computer (HPC) clusters.

Applications

• 10 Gigabit Ethernet
• 40 Gigabit Ethernet
• InfiniBand4x SDR, DDR, QDR
• 2, 4, 8, 10 Gigabit Fiber Channel
• Fiber Channel over Ethernet SAS,Servers,Hubs,Switches,Routers
• QSFP+ DAC, 40G DAC, DAC Cable 

Features

• QSFP+ conforms to the Small Form Factor SFF-8436
• 4-Channel Full-Duplex Passive Copper Cable Transceiver
• Support for multi-gigabit data rates :1 Gb/s - 10 Gb/s (per channel)
• Maximum aggregate data rate: 40 Gb/s (4 x 10Gb/s)
• Copper link length up to 5m (passive limiting)
• High-Density QSFP 38-PIN Connector
• Power Supply :+3.3V
• Low power consumption: 0.02 W (typ.)
• I2C based two-wire serial interface for EEPROM signature which can be customized
• Temperature Range: 0~ 70 °C

40G QSFP+ to QSFP+ Passive Direct Copper Cables

Pin Definitions

Mechanical Dimensions




Product Specification

Test Type	Test Item	Target	Reference
Electrical Characteristics	Differential Mode RL(SDDII)	0.01<f<4.1 ; < -12+2*SQRT(f ) 4. 1<f<11. 1 ; <-6.3+13*log10(f/5.5) Where f is in GHz Measurements units: dB	SFF 8431
	Common mode return loss (SCCII)	0.01<f<2.5 ; <-7+1.6(f ) 2.5<f<11.1 ; <-3 Where f is in GHz Measurements units: dB	SFF 8431
	NEXT	<-26dB from 1MHz to 11GHz	/
	Cable assembly Impedence	100+/ -100hm Rise time of 30 ps (20 %- 80 %)	(20%~80 %)
	Insertion Loss Deviation	-1dB≤ILD≤1dB 300KHz≤f≤6GHz	/
Environmental Characteristics	Operating Temperature	-40~85°C	Cable operating temp. range
	Thermal Shock	Electrical performance meet the specification requirement	EIA-364-32D. Method A. TC-1. -55 10 85C,100 cycles, 15 min, dwells
	Cyclic Temp. & Humidity	Electrical performance meet the specification requirement	EIA-364-31 Method III,Test Cond A
	Salt spray	48 hours salt spraying after shell corrosive area less than 5%	EIA-364-26
	Temperature Life	Performance meets the specification requirement	EIA-364-17B w/ RH, Damp heat 85C at 85% RH for 500 hours
Mechanical Characteristics	MechanicaI Vibration	Performance meets the specification requirement	EIA-364-28E.11 TC-VII, Test Cond. D 15minutes in X,Y,Z axis.
	Cable Plug Retention in Cage	90N Min.	No functional damage to cable plug below 90N. Per SFF-8432 Rev 5.0
	Cable Retention in Plug	90N Min.	EIA-455-6B
	Mechanical Shock	Performance meets the specification requirement	Clamp and Shock per EIA-364-27B, TC-G, 3times in 6directions, 100g, 6ms

Table.1 Absolute maximum ratings

Parameter	Symbol	Min	Max	Unit
Maximum Supply Voltage	Vcc	0	3.6	V
Storage Temperature	Ts	-40	85	°C
Relative Humidity	RH	5	95	%

Table.2 Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Operating Case Temperature	Standard Tc	0	25	70	°C
Storage Temperature	Ts	-40		85	°C
Power Supply Voltage	Vcc	3.13	3.30	3.47	V
Power Dissipation	PD			0.5	W
Relative Humidity	RH	5		95	%
Data Rate			10.5		Gbps

FIBCONET boasts three state-of-the-art manufacturing centers covering over 10,000 sqm in Ningbo, Guizhou, and Northeast China, with a team of 800 highly skilled engineers and staff members. 

With a production capacity of 300,000 PLC Splitters and 10 million fiber optical connectors per month, FIBCONET has earned a reputation as a national high-tech enterprise that excels in innovation, securing 50 patents and 15 invention patents.

Our PLC splitter, for instance, can function optimally even in extremely cold conditions of up to -50 centigrade degrees, making it an ideal solution for clients operating in harsh environments like Russia. We also offer connectors with an insert loss of just 0.1 dB, a rarity in the industry that we can deliver.

Q: The History of our factory? 

A: In 2000, Fibconet entered the communications industry and began to make adapters. It accumulated funds to invest in jumper production in 2006 and increased the optical splitter workshop in 2009. Fibconet won the national high-tech industry in 2013, sold over 15 million US dollars in 2015, and began to explore foreign markets.

Q: The location of our factory? 

A: Our factory is located in Ningbo, Zhejiang, and our new factory has also been put into production, located in the Northeast (Jilin Province).

Q: An occupied area for our factory?

A: The construction area of our factory is about 23,000 square meters, including 8000 square meters in Fenghua Plant and 15,000 square meters in Northeast China.

Q: Production capacity for the PLC splitter? 

A: 800,000 pcs per month.

Q: What's your best price for your passive fiber optic product?

A: Based on the quality of our products and the quantity of your estimated. We would quote the great best matching price all the time.

Q: Do you offer a guarantee for the products? 

A: Yes, we offer a 1-2 years warranty on our formal products.