2 4 8 10 Gigabit Fiber Channel 40g Qsfp+ to Qsfp+ Passive Direct Copper Cable Dac Patch Cord

• Customization: Available
• Application: Communication, Sensor, Medicine, Probe
• Type: Single-mode Fiber
• Model NO.: DAC Patch Cord
• Connection Structure: SC
• Material Shape: Round Wire
• Allowed Lateral Pressure: 100(N/100mm)<1000(N/100mm)
• Allowed Tensile Strength: 1000N<10000N
• Core: Single Core
• Certification: RoHS, CE, ISO9001
• Brand: Fibconet
• Sheath Material: PVC
• Model Number: Aoc Patch Cord
• Brand Name: OEM
• Temperature: 0 to 70ºC
• Voltage: Sm/mm3.0 to 3.6V
• Tx Power: -5 to -1dBm
• Rx Power: -30 to 0dBm
• Bias Current: 0 to 100mA
• Transport Package: Carton
• Specification: Customized
• Trademark: Fibconet
• Origin: Ningbo, China
• HS Code: 7413000000
• Production Capacity: 5, 000, 000pieces/Month

Product Description

2 4 8 10 Gigabit Fiber Channel 40G QSFP+ to QSFP+ Passive Direct Copper Cable DAC Patch Cord


Description:

 IH's 40G QSFP+ Passive Copper Cables  are high performance,cost effective I/O solutions for 40G LAN, HPC and SAN applications. The QSFP+ passive copper cables are compliant with SFF-8436, QSFP+ MSA and IEEE P802.3ba 40GBASE-CR4. It is offer a low power consumption,short reach intercon- nect applications. The cable each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.
   IH's 40G QSFP+ Passive Copper Cables are customized for an ultra-high performance, cost effective cable solution in 40-Gigabit speed applications including switched fabric I/O, switches, routers, data storage arrays, and high performance computer (HPC) clusters.

Applications

• 10 Gigabit Ethernet
• 40 Gigabit Ethernet
• InfiniBand4x SDR, DDR, QDR
• 2, 4, 8, 10 Gigabit Fiber Channel
• Fiber Channel over Ethernet SAS,Servers,Hubs,Switches,Routers
• QSFP+ DAC, 40G DAC, DAC Cable 

Features

• QSFP+ conforms to the Small Form Factor SFF-8436
• 4-Channel Full-Duplex Passive Copper Cable Transceiver
• Support for multi-gigabit data rates :1 Gb/s - 10 Gb/s (per channel)
• Maximum aggregate data rate: 40 Gb/s (4 x 10Gb/s)
• Copper link length up to 5m (passive limiting)
• High-Density QSFP 38-PIN Connector
• Power Supply :+3.3V
• Low power consumption: 0.02 W (typ.)
• I2C based two-wire serial interface for EEPROM signature which can be customized
• Temperature Range: 0~ 70 °C

40G QSFP+ to QSFP+ Passive Direct Copper Cables

Pin Definitions

Mechanical Dimensions




Product Specification

Test Type	Test Item	Target	Reference
Electrical Characteristics	Differential Mode RL(SDDII)	0.01<f<4.1 ; < -12+2*SQRT(f ) 4. 1<f<11. 1 ; <-6.3+13*log10(f/5.5) Where f is in GHz Measurements units: dB	SFF 8431
	Common mode return loss (SCCII)	0.01<f<2.5 ; <-7+1.6(f ) 2.5<f<11.1 ; <-3 Where f is in GHz Measurements units: dB	SFF 8431
	NEXT	<-26dB from 1MHz to 11GHz	/
	Cable assembly Impedence	100+/ -100hm Rise time of 30 ps (20 %- 80 %)	(20%~80 %)
	Insertion Loss Deviation	-1dB≤ILD≤1dB 300KHz≤f≤6GHz	/
Environmental Characteristics	Operating Temperature	-40~85°C	Cable operating temp. range
	Thermal Shock	Electrical performance meet the specification requirement	EIA-364-32D. Method A. TC-1. -55 10 85C,100 cycles, 15 min, dwells
	Cyclic Temp. & Humidity	Electrical performance meet the specification requirement	EIA-364-31 Method III,Test Cond A
	Salt spray	48 hours salt spraying after shell corrosive area less than 5%	EIA-364-26
	Temperature Life	Performance meets the specification requirement	EIA-364-17B w/ RH, Damp heat 85C at 85% RH for 500 hours
Mechanical Characteristics	MechanicaI Vibration	Performance meets the specification requirement	EIA-364-28E.11 TC-VII, Test Cond. D 15minutes in X,Y,Z axis.
	Cable Plug Retention in Cage	90N Min.	No functional damage to cable plug below 90N. Per SFF-8432 Rev 5.0
	Cable Retention in Plug	90N Min.	EIA-455-6B
	Mechanical Shock	Performance meets the specification requirement	Clamp and Shock per EIA-364-27B, TC-G, 3times in 6directions, 100g, 6ms

Table.1 Absolute maximum ratings

Parameter	Symbol	Min	Max	Unit
Maximum Supply Voltage	Vcc	0	3.6	V
Storage Temperature	Ts	-40	85	°C
Relative Humidity	RH	5	95	%

Table.2 Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Operating Case Temperature	Standard Tc	0	25	70	°C
Storage Temperature	Ts	-40		85	°C
Power Supply Voltage	Vcc	3.13	3.30	3.47	V
Power Dissipation	PD			0.5	W
Relative Humidity	RH	5		95	%
Data Rate			10.5		Gbps

Company Profile

 

 

1. who are we?
We are based in Zhejiang, China, start from 2020,sell to South America(30.00%),Southeast Asia(20.00%),South Asia(20.00%),Eastern Europe(10.00%),Mid East(10.00%),Central America(10.00%). There are total about 101-200 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;

3.what can you buy from us?
plc splitter,patch cord,fiber optic cable,splice closure,distribution box

4. why should you buy from us not from other suppliers?
Fibconet focus on the fiber optical components, such as PLC splitter, patch cord, adapter, connectors etc. Especially for the PLC spliiter, it can work in the extremely cold environment. Even in the -50 centigrade degree, like in Russia.

5. what services can we provide?
Accepted Delivery Terms: all;
Accepted Payment Currency:all;
Accepted Payment Type: all;
Language Spoken:nullOperating Case Temperature